Basic Rate Interface Expansion Board (Brib-E) - Vodavi Starplus Triad 1/2/3 Installation Manual

CO/PBX Connections
Conditions
BRI EKTS support is available in Vodavi telephone systems with software
version 3.0G and higher.
Like DID, EKTS can be programmed to route calls using up to 7 digits. By
default, only the last three digits are analyzed for routing.
EKTS does not require a line appearance on a specific telephone because
the BRI terminates directly into the KSU.
Vodavi supports Basic EKTS. The EKTS caching option is not supported by
Vodavi. Caching is normally used when an ISDN telephone instrument is
used on the customer premise.

Basic Rate Interface Expansion Board (BRIB-E)

This card installs as a daughter-board on the BRIB and provides an
additional four Basic Rate Interface circuits. One BRIB and BRIB-E
assembly provides 16 line appearances to the
of four BRIB/BRIB-E assemblies can be installed into the system.
The BRIB-E uses the U interface of the BRI standard. Connection to the
network is made via RJ45 connectors on the front edge of the board. The
BRIB-E card uses eight time slots when installed.
Triad 3system. A maximum
3-67