Vodavi Starplus Triad 1/2/3 Installation Manual page 159

3-56
Installing the DTMF-A Modules
1. Unpack the DTMF-A Modules from their antistatic conductive bags in
2. Locate the CONN5 and CONN6 connectors on the DTMF-A modules.
3. Locate the CON4, CON5, CON8 and CON9connectors on the T1IB
4. Position one of the DTMF-A modules so that the CONN5 and CONN6
5. Push the DTMF-A module onto these connectors making sure it is
6. Position the second DTMF-A module so that the CONN5 and CONN6
7. Push the DTMF-A module onto these connectors making sure it is
Refer to
DTMF-A Modules.
the packing boxes.
(outlined).
connectors match up with the CON8 and CON9 connectors on the
T1IB respectively.
seated properly.
connectors match up with the CON4 and CON5 connectors on the
T1IB respectively.
seated properly.
Figure 3-22. This completes the installation procedure for the
CO/PBX Connections