5-20
CO Line Configuration
Figure 5-4
when a LCOB is installed in that slot and:
The installer types d<space>s2 at the maint> prompt.
Column
Indicates:
1
CO Line Number
2
Status:
OOSstatus can indicate the entire card is out of service.
INS status can indicate a board station is in-service and operating correctly.
Incoming = Incoming CO line calls are allowed
Outgoing = Outgoing CO line calls are allowed
Bothway = Both incoming and outgoing CO line calls are allowed
For example, Outgoing Enabled indicates the CO line is active in the system.
Outgoing Disabled indicates that the Attendant has disabled the CO line for
outgoing access.
3
Whether CO Line is Pulse or DTMF (programmable option)
4
Whether CO Line is a CO Line or a PBX Line (programmable option)
5
CO line State
illustrates a representation of what is printed out for slot two
Figure 5-4: CO Line Configuration
Remote Maintenance