Keyset Self Test
Key Telephones/Terminals
The following actions apply to multi-line key telephones:
Function
No Power to Keyset
No Handsfree Answer-back on
intercom
CO Line/Station Button won't access
CO Line/Station
Speakerphone doesn't work
Can not call another intercom station
No Camp-On signals or Override to
phone
Station response to wrong intercom
number
Table 5-2: Key Telephones/Terminals
Verify that keyset is connected to correct type of
station card (digital or electronic.
On digital keysets, the mode of intercom answer is
programmable.
On electronic keysets, make sure the intercom
mode switch is in the HF position.
Check Flexible button programming for that
button.
Check station programming for speakerphone
allowed.
Verify phone is a speakerphone model.
Check programming for intercom access.
Check station programming for Override enable
(adjacent circuit number only, e.g. 110 & 111) Data
pair of wires are reversed on electronic keysets
(ETIB), or DSS.
Check programming for assigned intercom
number
Fault Options
5-7