Meet-Me Answer; Room Monitoring - Panasonic S-ICX Technical Manual

Chapter 7. SLT Features
4. Make your announcement.
5. Replace the handset.

Meet-Me Answer

To answer a page using Meet-Me Answer:
1. Lift the handset.
2. Enter the Meet Me Answer code (default = ##).
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to Paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
• An extension can belong to more than one paging group.
• Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal unless your system allows Paging Override.
• Beginning with Version 4.5 and higher, the paging system can be set to "timeout" if a page is
longer than the specified length of time (0 to 255 seconds). If this feature is set and the timeout
period has elapsed, the page originator's handset will emit a Fast Busy Tone.

Room Monitoring

Version 4.5 and higher
Description
This feature allows the user to monitor the sounds in a room from another extension or room. The
transmitter in the telephone handset is used as a remote "microphone" for monitoring these sounds.
296
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Result
Intercom dial tone
Connected to specified party
S-ICX-50-700