Extension Direct Pickup; Trunk Group Pickup - Panasonic S-ICX Technical Manual

Section 700 - Operation
To use Specified Group Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Group Pickup code (default = 703 [UK/
HK] or 703# [Taiwan, Malaysia, Indonesia]).
3. Enter the number of the call pickup group (01-72) where the
call is ringing.
4. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Considerations
• The Call Pickup Group assignments determine the order calls are picked up (i.e. if two calls are
ringing in the call pickup group, the call ringing the first member will be picked up first).

Extension Direct Pickup

Extension Direct Pickup allows you to answer a call to another extension by dialling the number of
the ringing extension.
Operation
To use Extension Direct Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Extension Direct Call Pickup code (default = 704
[UK/HK] or 704# [Taiwan, Malaysia, Indonesia]).
3. Dial the number of the ringing extension.
4. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Considerations
• N/A

Trunk Group Pickup

Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
S-ICX-50-700
Action
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
231