Panasonic S-ICX Technical Manual page 253

Section 700 - Operation
Note: Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have been
programmed with the appropriate speed dial information.
Operation
To link multiple SSD numbers to a PSD bin:
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
4. Enter the PSD bin number (80-99).
5. Press the MEMORY key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be called.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialled.
8. Press the HOLD key when finished.
To use a PSD that links multiple SSDs:
1. If necessary, select the trunk group (default = 9 [UK/HK], 0
[Taiwan, Malaysia, Indonesia], or 81-84). (Normally the
trunk is selected by the speed dial numbers.)
2. Press the MEMORY key.
3. Enter the PSD bin number (80-99).
To manually link speed dials together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the MEMORY key, then enter the PSD or SSD bin
number.
4. Press the MEMORY key and enter the PSD or SSD codes
to dial the parts of the phone number until it is completed.
Hardware Requirements
• N/A
S-ICX-50-700
Action
Action
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Result
Result
Intercom dial tone
Outside dial tone
253