Panasonic S-ICX Technical Manual page 268

Chapter 7. SLT Features
Operation
To make an outside call that requires an account code:
1. Lift the handset.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (max. 10 digits).
4. Press the # key.
5. Enter trunk access code (default = 9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia], or 81-84).
6. Dial the phone number.
Hardware Requirements
• A Call Logging printer or external call accounting system is required to collect account code
records.
Related Programming
• FF1-0-19: TRS (Call Barring) Class for Forced Account Code
• FF1-2: Dial Plan
• FF3: Forced Account
• FF3: Verified Account
• FF8-1-04: Verified Account Codes with TRS (Call Barring) Class
Considerations
• Account codes are not available during conversation recording mode for the Built-In Voice Mail.
• Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
• Account codes will be cancelled after using trunk queuing.-
• Account codes are not available for a Dial Pulse SLT.
• SLT telephones can only use account codes with outgoing calls only.
• Account Codes interact with TRS (Call Barring) as shown in the following table:
Forced or Not Forced
Not Forced
Forced
268
Action
Verified or
Non-Verified
Non-Verified Extension Port Based TRS
Verified
Non-Verified TRS (Call Barring) Class
for Forced Account Code
Verified
S-ICX (International) issued October 2000
Intercom dial tone
TRS (Call Barring) Class
No Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Extension Port Based TRS
(FF1 0 19 0001)
Account Code Based TRS
Section 700 - Operation
Result
Account Entry
(Call Barring) Class
(Call Barring) Class
(Call Barring) Class
(Call Barring) Class
S-ICX-50-700