Mco Line Preference; Mco Trunk Access - Panasonic S-ICX Technical Manual

Chapter 5. Key Telephone Features
Operation
To use Direct Trunk Access:
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
• N/A
Considerations
• N/A

MCO Line Preference

MCO Line Preference allows you to place an outside call by simply picking up the handset. When you
go offhook, the MCO 1 trunk group is automatically accessed.
Operation
To place a call using MCO Line Preference:
1. Lift the handset.
2. Dial the phone number.
Hardware Requirements
• N/A
Considerations
• You can press the ON/OFF key to get intercom dial tone.

MCO Trunk Access

The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
202
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Dialled number displays
• Outside dial tone
• CO XXX displays (where XXX = line
number)
Dialled phone number displays
Result
• Outside dial tone
• CO XXX displays (where XXX = trunk
number)
Dialled phone number displays
S-ICX-50-700