Conference Calls - Panasonic S-ICX Technical Manual

Section 700 feature operation
Hide thumbs Also See for S-ICX:
Table of Contents

Advertisement

Section 700 - Operation
Text message send and text message reply requires display Key Telephones. Also, Text Message
Send and Text Message Reply keys must be programmed on the telephones.

Conference Calls

Description
Conference Calls allow you to add another party to an existing conversation. With the standard
system configuration, up to 3 parties can be included in a conference call at any one time. If the
optional Conference Card is installed, up to 8 parties can participate in a conference call.
Any combination of extensions and trunk lines can be in the conference as long as the original
extension is in the conference and the total number of parties does not exceed 8. Only one operation is
used to establish and add to a conference. You simply have to place the current call on hold, dial the
next party and press the CONF key. No different operation or access code is required to add
additional parties to the call.
When no optional conference card is installed, the system supports the following types of three-party

conference calls:

3 extensions
2 extensions and 1trunk line
1 extension and 2 trunk lines
When the optional 8-party conference card is installed, the system supports any combination of
conference calls, except all outside lines.
Operation
To establish a conference call:
1. While on a call, press the HOLD key or the line key of your
current call.
2. If adding an outside party, press a vacant trunk key, or dial a
trunk access code (default = 9 [UK/HK], 0[Taiwan, Malay-
sia, Indonesia], or 81-84).
3. Dial the number of the party you wish to add to the call.
4. Press the CONF key when your call is answered.
5. To add additional parties, repeat steps 1-4
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 5. Key Telephone Features
Result
Extension number, outside line number,
or name of held party displays
• Outside dial tone
• CO #XXX displays (where XXX = line
number)
Dialed number displays
CNF1:CO XXX or EXT XXX and
CNF2:CO YYY or EXT YYY displays
(where XXX = first party and YYY = sec-
ond party)
147

Advertisement

Table of Contents
loading

Table of Contents