Panasonic S-ICX Technical Manual page 248

Chapter 6. DSLT Features
To set up the monitoring extension:
1. Dial the monitoring extension access code (default 776)
and the extension number of the monitored extension, OR...
Press an FF key assigned the monitored access code and the
extension number of the monitored extension, OR...
While the handset is on-hook, press an FF key assigned to
the Room Monitor followed by the monitored extension
number.
The monitoring operation can be allowed or denied by extension COS and is controlled by the Busy
Override feature. If Busy Override is denied and the user attempts to monitor an extension, the user
will hear a fast busy tone.
Additional operations may be performed from the monitoring extension when it is in monitoring
mode:
1. Placing the handset back On Hook or pressing ON/OFF
2. Pressing digits 0-9, *, #, PROG, CONF, MIC, MENU,
PREV, NEXT, FL/R, REDIAL, MEMORY, FF Key
3. LINE
Services available on the monitoring extension while the Room Monitoring feature is active:
• Camp On
• Call Back
• Message displayed on LCD when extension is busy
• Message Waiting On/Off
• Cancellation of DND and Call Forwarding by another extension
• Busy Transfer
• DIL Incoming Call (Queuing)
Services NOT available to either the monitored or monitoring extension when this feature is active:
• Busy Override
• On-Hook VA
• The ability to receive a text message
• Silent Monitor
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
• FF1-2-02: Dial Plan at DT Pattern 1
• FF1-2-03: Dial Plan at DT Pattern 2
248
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
The monitoring extension enters the mon-
itoring mode. (If the monitored extension
has an LCD display, a confirmation mes-
sage will also be shown.)
The monitoring extension will automati-
cally enter the monitoring mode.
Result
Monitoring mode is cancelled. Extension
returns to idle.
No response is given. Extension remains
in monitoring mode.
Monitoring mode is cancelled. Dial tone
is returned to handset.
S-ICX-50-700