Offhook Signalling - Panasonic S-ICX Technical Manual

Chapter 5. Key Telephone Features
Operation
To put a call on speaker using the Offhook Monitor:
1. During a handset call, press the ON/OFF key.
2. To take a caller off speaker (disable Offhook Monitor) but
continue the call via the handset, press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• Offhook Monitor is available on 44-Series phones only.
• Offhook Monitor can be disabled system-wide.

Offhook Signalling

Description
Offhook Signalling sends a tone to a busy extension to indicate that another trunk call has arrived or a
call is camped-on.
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the trunk of the incoming call.
Note: For details about handling multiple calls, see "Call Hold" on page 129.
Hardware Requirements
• N/A
Considerations
• The trunk call type may be multiple ring, direct, BLF Ring, or camp-on.
• The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
176
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
• Other party is audible through speaker
and handset
• Phone's microphone is mute
Result
First call on hold
S-ICX-50-700