Panasonic S-ICX Technical Manual page 286

Chapter 7. SLT Features
automatically connected to the new call. The called party can also place the first call on hold by
Hookflashing and then answering the waiting call.
The System provides two types of call waiting:
• Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal.
You need only to remain on the line.
• Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy
extension.
Operation
To use Automatic Camp-on:
1. Lift the handset.
2. Dial the extension number.
3. Remain on the line until the called party answers.
To use Manual Camp-on:
1. Lift the handset.
2. Dial the extension number.
3. Enter the Camp-On (Call Waiting) code (default = 2 [UK/
HK] or 2# [Taiwan, Malaysia, Indonesia]).
4. Remain on the line until the called party answers.
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset.
2. Lift the handset again to be connected to the waiting call.
OR....
Hookflash.
Hardware Requirements
• N/A
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS
286
Action
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Intercom dial tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
Intercom dial tone
Busy tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
• Current call placed on hold
• Connected to waiting call
S-ICX-50-700