Speed Dial Name Assignments - Panasonic S-ICX Technical Manual

Chapter 3. System Features
Hardware Requirements
• N/A
Considerations
• Extension names can be up to 10 characters in length.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4, "User
Maintenance" of this document.)

Speed Dial Name Assignments

You can assign names to PSD numbers from a display telephone without entering the programming
mode. If allowed in the Extension COS, you can also assign names to SSD numbers.
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the PSD Name Assignment mode.
5. Press the up or down arrow key to display the desired PSD
bin number.
6. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
47.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 48.)
Note: Press the FL/R key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See "Example 1. Large-display phone" on page 47.
• See "Example 2. Small-display phone" on page 48.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note: Press the FL/R key to clear the entire entry.
9. Press the HOLD key when finished.
10. To enter another speed dial name repeat steps 5-9.
50
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
A B C D E F P80 displays (where P80 =
PSD bin 80)
A B C D E F PXX displays (where PXX
= desired PSD bin number)
Next PSD bin number displays
S-ICX-50-700