Small-Display Phone - Panasonic S-ICX Technical Manual

Chapter 5. Key Telephone Features
System Dial
Contains SSD numbers. To scroll through the SSD Directory, press the NEXT or PREV button
located beneath the display.
• SSD numbers must be programmed before they will appear in the speed dial directory. For
information on programming speed dial numbers, see "Speed Dialling" on page 187.
Extension
Contains the Extension Directory (grouped alphabetically). To scroll through the Extension Directory,
press the NEXT or PREV button located beneath the display.
Function System
Provides easy access to most key telephone features, such as Call Forwarding, Do-Not-Disturb
(DND), Microphone Mute, Background Music, Call Pickup, Account Codes, Message Waiting /
Callback, Headset On/Off, Extension Port confirmation, etc.
To scroll through the list of items, press the NEXT or PREV button located beneath the display.
Function Ext
Allows you to assign frequently used telephone features for easy access. Most items found under
Function System can be assigned to the Function Ext area, in any order you desire. (For additional
information, see Section 400 - Programming.)
Large-LCD Display During Idle
The large display telephone may optionally be set to return to a selected idle screen after the user goes
on-hook. If the Large-LCD Display During Idle setting (FF3 0 BSSC 04 11 HOLD) is set to 1 (allow),
after moving to the desired menu is displayed, the user may enter ON/OFF PROG ## ON/OFF to
select the menu as the idle menu.

Small-Display Phone

Figure 6. Small-Display Menu (shown in default idle condition)
The Mode key and End key on a small-display phone allow you to change the software mode of the
display from Default (i.e., time and date) mode to Directory mode. While in Directory mode, you can
view SSD and PSD Directories and Extension Directories. You can dial a speed dial number or
extension by pressing the soft key next to the desired number. You can also use the soft keys to
execute programmed system features while in the Variable mode.
Notes:
• The MODE key allows you to switch the display from Default to Directory mode. The END
key allows you to return the display to Default mode.
• The soft keys allow you to view speed dial and extension directories and to dial a speed dial
number or extension while in the Directory mode.
• Speed dial numbers must be programmed before they will appear in the speed dial directory.
For information on programming speed dial numbers, see "Speed Dialling" on page 187.
154 S-ICX (International) issued October 2000
Section 700 - Operation
S-ICX-50-700