Call Forwarding - No Answer - Panasonic S-ICX Technical Manual

Section 700 - Operation
To set Call Forwarding - Busy:
1. Lift the handset.
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 722 (UK/HK) or 722# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 742 (UK/HK) or 742# (Tai-
wan, Malaysia, indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see "Speed Dialling" on page 276.)
5. Replace the handset.
To cancel Call Forwarding - Busy:
1. Lift the handset.
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 732 (UK/HK) or 732# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 752 (UK/HK) or 752# (Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.

Call Forwarding - No Answer

When Call Forwarding - No Answer is set, a call will ring until the Call forward No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
S-ICX-50-700
Action
Action
S-ICX (International) issued October 2000
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
273