Panasonic S-ICX Technical Manual page 90

Chapter 4. User Maintenance
Operation
To set PSD names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 01.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key.
9. Enter the PSD bin number (80-99).
10. Press the HOLD key.
11. Enter the PSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
desired speed dial name.
Note: Press the FL/R key to clear the entire entry.
14. Press the HOLD key to store the entry.
15. To set additional PSD names, press the volume up and
down key or press the HOLD key to move to the desired
PSD.
16. Repeat steps 11-15 until all PSD names are entered.
90
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
81-
User MAINT displays
8101-
PSD Assignment displays
1 :
PSD Name displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialled extension number)
A B C D E F PXX displays (where
PXX = PSD number)
Next PSD bin number displays
Desired PSD bin number displays
S-ICX-50-700