Panasonic S-ICX Technical Manual page 193

Section 700 - Operation
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the PSD Name Assignment mode.
5. Press the up or down arrow key to display the desired PSD
bin number.
6. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
194.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 195.)
Note: Press the FL/R key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See "Example 1. Large-display phone" on page 194.
• See "Example 2. Small-display phone" on page 195.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note: Press the FL/R key to clear the entire entry.
9. Press the HOLD key when finished.
10. To enter another speed dial name repeat steps 5-9.
SSD Names:
To set SSD names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 1 for the SSD Name Assignment mode.
S-ICX-50-700
Action
Action
S-ICX (International) issued October 2000
Chapter 5. Key Telephone Features
Result
A B C D E F P80 displays (where P80 =
PSD bin 80)
A B C D E F PXX displays (where PXX
= desired PSD bin number)
Next PSD bin number displays
Result
SSD NO.=>
SSD NAME displays
193