Line Preference - Outgoing (Idle Line / No Line / Prime Line) - Panasonic KX-TD816JT Features Manual

Line Preference – Outgoing (Idle Line / No Line /
Prime Line)
Description
A proprietary telephone user can select a desired outgoing line preference to originate calls
from the following three line preferences by Station Programming (Preferred Line Assignment
– Outgoing).
Type
Idle Line
No Line
Prime Line
Conditions
[General]
• Setting a new line preference feature cancels the previous setting.
• The outside lines used by users must be connected by programming. <[400] Outside Line
Connection Assignment>
• The user can override the Idle / Prime Line Preference temporarily to select a specific line.
To select it, press the desired line access button (INTERCOM or CO button) before going
off-hook or pressing the SP-PHONE / MONITOR button; or if Full One-Touch Dialling is
enabled, press One-Touch Dialling, DSS, REDIAL or SAVE button.
[Idle Line]
• To select Idle Line Preference, outside lines available for the user should be programmed.
Also outside lines available for Automatic Line Access should be assigned. <[103]
Automatic Access Outside Line Group Assignment>
Programming Guide References
• [005] Flexible CO Button Assignment
• [103] Automatic Access Outside Line Group Assignment
• [400] Outside Line Connection Assignment
• [605-606] Outgoing Permitted Outside Line Assignment – Day / Night
Features Guide
When you go off-hook, you are connected to an idle line. An idle line
is automatically selected from the pre-assigned lines.
No line is selected when you go off-hook. You must select a line to
make a call.
When you go off-hook, you are connected to the pre-assigned line.
Assign an outside or intercom line as your prime line beforehand.
1.6 Originating Features
Description
85