Mco Line Preference - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
To use Direct Trunk Access:
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
• N/A

MCO Line Preference

MCO Line Preference allows you to place an outside call by simply picking up the handset. When you
go offhook, the MCO 1 trunk group is automatically accessed.
Operation
To place a call using MCO Line Preference:
Action
1. Lift the handset.
2. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1: MCO Trunk Access
• FF3: MCO
• FF5-2: MCO Trunk Groups (Outbound)
Considerations
• You can press the ON/OFF key to get intercom dial tone.
576-50-700
Action
• Outside dial tone
• CO XXX displays (where XXX = trunk number)
Dialed phone number displays
DBS 576 (USA) issued September 2001
Chapter 5. Key Telephone Features
Result
Dialed number displays
• Outside dial tone
• CO XXX displays (where XXX = line number)
Dialed phone number displays
Result
5-93