IBM Infoprint 6500-v05 Maintenance Manual page 130

Operator Panel Message
164 ERROR: SDRAM
JEDEC MISSING
167 ERROR:
PROGRAM NEEDS MORE DRAM
168 ERROR: PROGRAM
NEEDS MORE FLASH
169 ERROR: PROGRAM
NOT COMPATIBLE
Table 3. Message List
Explanation
The JEDEC table in the SDRAM
DIMM is missing, corrupted, or
defective. The printer uses this
table to identify the SDRAM.
The printer requires more SDRAM
memory in order to run the
downloaded program.
The printer requires more flash
memory in order to run the
downloaded program.
The printer is not compatible with
the downloaded program.
Corrective Action
Cycle power. If the message appears, replace the controller board.
Use a smaller emulation program (page 231).
Add flash memory or use a smaller emulation program (page 231).
NOTE: The printer must have at least 8MB of flash memory for the
latest level of code to work correctly.
Use the correct emulation software option(s) for this model printer
(page 231).
Display Messages
130