IBM Infoprint 6500-v05 Maintenance Manual page 108

Operator Panel Message
126 PAP FEED BAD TABLE *
SEE USERS MANUAL
Table 3. Message List
Explanation
Paper feed bad table. The paper
feed process on the controller
board has a corrupted table. If this
message appears during a
software download, do the
download again. If the message
appears on the second try,
replace the controller board.
Record the message and return it
with the defective board. After
replacing the controller board, DO
NOT make the printer READY, but
immediately download the latest
code from IBM First (page 231),
then power up in download mode
and load the flash memory (page
238).
Corrective Action
1. Cycle power. Run the print job again. If the message appears,
download the emulation software again.
2. Power on the printer. If the problem reappears, the controller
board or microcode is suspect. Do the following:
3. Save the printer configuration values. (Refer to the User's
Manual .)
4. Clear NVRAM (page 237).
5. Download and install the latest code from IBM First (page 231).
6. Power on the printer in download mode and load flash memory
(page 238).
a. If you encounter loading problems, go to the appropriate error
code for resolution.
b. If you encounter the failure or message that brought you to
this procedure, replace the controller board (page 319). After
replacing the controller board, DO NOT make the printer
READY, but proceed immediately to the next step.
7. Download and install the latest code from IBM First (page 231).
8. Power on the printer in download mode, and load flash memory
(page 238).
9. If you encounter the failure after replacing the controller board,
reinstall the original controller board and contact your DDS and
Second Level Support.
Display Messages
108