Threading The Label Roll Onto The Drive Roller; Fastening The Label Roll To The Rewinder - Avery Dennison ALS 204 Operating Instructions Manual

C
ONTENTS
3.2 I
NSERTING LABEL MATERIAL
Threading the label roll onto the drive
roller
Open the pressure roller. To do so, rotate the lever
[37D] in a clockwise direction.
Feed the backing paper around the deflection roller
[37B], drive roller [37C] and the dancer arm [37A].
Close the pressure roller. To do so, rotate the lever
until it snaps in noticeably.

Fastening the label roll to the rewinder

Clamp the backing paper to the rewinder as shown
and tighten it [39].
Manually rotate the rewinder by one turn.
A
D
[37] Open the pressure roller.
[38] Close the pressure roller.
[39] Fastening the backing paper to the rewinder.
36
ALS
20x
256
GB
B
C