Avaya G250 Administration Manual page 746

Traps and MIBs
Name Parameters
(MIB variables)
lntPolicy ipPolicy
AccessControlVi AccessControl
olationFlt ViolationEnt
ID,
ipPolicy
AccessControlVi
olationSrc
Addr,
ipPolicy
AccessControl
ViolationDst
Addr,
ipPolicy
AccessControl
Violation
Protocol,
ipPolicy
AccessControl
Violation
L4SrcPort,
ipPolicy
AccessControl
ViolationL4DstP
ort,
ipPolicy
AccessControlVi
olation
Established,
ipPolicyRuleID,
ipPolicyRule
ListID,
ipPolicy
AccessControlVi
olationIf
Index,
ipPolicy
AccessControl
ViolationSub
Ctxt,
ipPolicy
AccessControl
ViolationTime
DormantPort genPortSWRdF
Fault ault,
genPortGroup
Id,
genPortId
DormantPort genPortSWRdF
Ok ault,
genPortGroup
Id,
genPortId
InlinePwrFlt genGroup
FaultMask,
genGroupId,
genGroup
BUPSActivity
Status
InlinePwrFltOK genGroup
FaultMask,
genGroupId,
genGroup
BUPSActivity
Status
746 Administration for the Avaya G250 and Avaya G350 Media Gateways
Class Msg Severity
Facility
P330 POLICY Warning
P330 SWITCH Warning
FABRIC
P330 SWITCH Notification Dormant
FABRIC
P330 POE Error
P330 POE Notification InlinePwr
Trap Name/ Format
Mnemonic
lntPolicy IP PolicyAccess
Access Control violation,
Control if-index$9
ViolationFlt ip-protocol=$4
src-ip=$2
dst-ip=$3
src-port=$5
dst-port=$6
rule-id=$8
rule-list=$$9
Dormant Dormant Port
PortFault Connection Lost
on Module $2 Port
$3;
Dormant Port
PortOk Connection
Returned to
Normal on Module
$2 Port $3;
InlinePwr Module $2 Inline
Flt Power Supply
failure
Module $2 Inline
FltOK Power Supply
failure was cleared
Description
This trap reports to the
Management station on
IP PolicyAccess Control
violation. The trap
includes in its varbind
information about the slot
where the event
occurred. The id of the
rule that was violated in
the current rules table,
and the quintuplet that
identifies the faulty
packet. A management
application would display
this trap and the relevant
information in a log entry.
This trap will not be sent
at intervals smaller than
one minute for identical
information in the
varbinds list variables.
This trap reports the loss
of connection on a
dormant port.
This trap reports the
return of connection on a
dormant port.
This trap reports the
failure of an inline power
supply.
This trap reports the
correction of a failure on
an inline power supply.
4 of 9