Configuration Using Cli; Configuration Using Gui Applications - Avaya G250 Administration Manual

Configuration using CLI

You can use the Avaya G250/G350 Media Gateway CLI to manage the G250/G350. The CLI is
a command prompt interface that enables you to type commands and view responses. For
instructions on how to access the G250/G350 CLI, see
This guide contains information and examples about how to use CLI commands to configure the
Avaya G250/G350 Media Gateway. For more information about the G250/G350 CLI and a
complete description of each CLI command, see the Avaya G250 and Avaya G350 CLI
Reference, 03-300437.

Configuration using GUI applications

Several Avaya GUI applications enable you to perform some configuration tasks on the Avaya
G250/G350 Media Gateway. It is recommended to use these applications whenever possible,
particularly for initial installation and provisioning.
The Avaya Installation Wizard (Avaya IW) is a web-based installation wizard that leads the user
through the key configuration steps of a G250/G350 installation. The Avaya IW can be used for
initial configuration of a G250/G350 with an S8300 installed as the G250/G350's primary (ICC)
or backup (LSP) call controller. For instructions on how to access the Avaya IW, see
Avaya IW on page 44. For step-by-step instructions on how to configure the G250/G350 using
the Avaya IW, see Installing and Upgrading the Avaya G250 Media Gateway, 03-300434 or
Installing and Upgrading the Avaya G350 Media Gateway, 03-300394.
The Gateway Installation Wizard (GIW) is a standalone application that allows the user to
perform certain basic G250/G350 configuration tasks. The GIW can be used for initial
configuration of a G250/G350 that does not have an S8300 installed as either the G250/G350's
primary (ICC) or backup (LSP) call controller. For instructions on how to access the GIW, see
Accessing GIW
using the GIW, see Installing and Upgrading the Avaya G250 Media Gateway, 03-300434 or
Installing and Upgrading the Avaya G350 Media Gateway, 03-300394.
The Avaya Provisioning and Installation Manager (PIM) is an application that allows the user to
perform initial installation and provisioning of multiple gateways. It provides integrated network
system views that ease centralized configuration tasks, especially provisioning and installing
large numbers of gateways simultaneously. One of the primary functions of PIM is to provision
and configure Standard Local Survivability (SLS). For instructions on how to access PIM, see
Accessing PIM
Local Survivability (SLS)
on page 47. For step-by-step instructions on how to configure the G250/G350
on page 48. For instructions on configuring SLS, see
on page 129.
Configuration using CLI
Accessing the CLI on page 39.
Configuring Standard
Issue 5 June 2008
Accessing
35