Replacing/Adding/Upgrading Media Modules Using A Usb Mass Storage Device - Avaya G250 Administration Manual

Basic device configuration
12. Enter key config-key password-encryption followed by the same passphrase
that was used to create the Master Configuration Key (MCK) in the faulty gateway. This
creates on the new gateway an MCK identical to the MCK in the faulty gateway, which
enables the restore operation to decrypt the secrets in the configuration file.
The restored configuration file will include all the configuration of the gateway, including
user's names and passwords, IKE pre-shared keys, etc.
13. Insert the USB mass storage device in the new G250/G350 USB port.
14. Enter restore usb usbdevice0 backup-name, where backup-name is the backup
directory path and file name on the USB mass storage device.
15. Enter show restore status to check the status of the restore operation. The report
lists the files restored.
16. Obtain and install a VPN license. For information on obtaining a VPN license, see
Installing and Upgrading the Avaya G250 Media Gateway, 03-300434 or Installing and
Upgrading the Avaya G350 Media Gateway, 03-300394.
17. Update the S8300 on the new G250/G350 with the serial number of the new gateway,
otherwise the gateway is not able to register in the Avaya Communication Manager. See
Administrator's Guide for Avaya Communication Manager, 555-233-506.
The new G250/G350 is now a restored, fully-operational G250/G350.
Note:
Before unplugging the USB mass storage device, use the safe-removal usb
Note:
command to safely remove the USB mass storage device.
Replacing/adding/upgrading media modules using a USB mass storage
device
1. Backup the gateway by entering backup config usb usbdevice0 backup-name,
where backup-name is the backup directory path and file name you are creating on the
USB mass storage device.
A backup directory is created on the USB mass storage device, with a directory structure
as detailed in
2. From the Avaya support website, download to your PC the firmware files of the media
modules you are adding or upgrading. For each media module, download all firmware
corresponding to the various hardware vintage/suffix versions available for that module. If
you are not sure which files you need, you can download the firmware files of all media
modules. The restore operation uses only the files needed.
3. Insert the USB mass storage device into the PC's USB port, and copy the media modules'
firmware files to the MM subdirectory under the root backup directory.
122 Administration for the Avaya G250 and Avaya G350 Media Gateways
Table 23.