Basic device configuration
Enter show ip domain statistics to display the DNS resolver's statistics counters
●
Use the show protocol command to display the status of the DNS-client protocol
●
Clearing DNS resolver counters
Enter clear ip domain statistics to clear the DNS resolver's statistics counters.
Viewing DNS resolver logging
1. Enter set logging session enable to enable session logging to the terminal.
G350-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
2. Enter set logging session condition DNSC to view all DNS resolver messages of
level Info and above.
G350-001# set logging session condition DNSC Info
Done!
CLI-Notification: write: set logging session condition DNSC Info
Note:
You can also enable logging messages to a log file or a Syslog server. For a full
Note:
description of logging on the G250/G350, see
104 Administration for the Avaya G250 and Avaya G350 Media Gateways
Configuring logging on page
229.