Showing The Current Mgc List; Removing One Or More Mgcs; Changing The Mgc List; Setting Reset Times - Avaya G250 Administration Manual

Media gateways
Hide thumbs Also See for G250:
Table of Contents

Advertisement

Basic device configuration

Showing the current MGC list

To show the current MGC list, use the show mgc list command. This command shows the
IP addresses of the MGCs on the MGC list. It also shows whether or not SLS is enabled.

Removing one or more MGCs

To remove one or more MGCs from the MGC list, use the clear mgc list command. Type
the IP address of the MGC you want to remove as an argument to remove that MGC. You can
remove more than one MGC with one command by typing the IP addresses of all the MGCs you
want to remove, separated by commas. To remove all the MGCs on the list, enter clear mgc
list with no arguments.

Changing the MGC list

1. Enter clear mgc list with no arguments to clear the MGC list.
2. Enter set mgc list with a different set of IP addresses.
Note:
If you use the set mgc list command without first clearing the MGC list, the
Note:
G250/G350 simply adds the new MGCs to the end of the MGC list.

Setting reset times

If the connection between the G250/G350 and its registered MGC is lost, the G250/G350
attempts to recover the connection. Use the set reset-times primary-search
command and the set reset-times total-search command to set the timeout for the
G250/G350's search for the primary MGC and the other MGCs on its MGC list, respectively.
Use the set reset-times transition-point command to configure the point at which
the primary MGCs in the list end and the LSPs begin. For example, if there are three IP
addresses in the MGC list and the third address is the LSP, the transition point should be 2.
The default time for the primary search is one minute. The default time for the total search is 30
minutes. The default transition point is 1.
For example:
G350-001(super)# set reset-times primary-search 20
Done!
G350-001(super)# set reset-times total-search 40
Done!
G350-001(super)# set reset-times transition-point 1
Done!
96 Administration for the Avaya G250 and Avaya G350 Media Gateways

Advertisement

Table of Contents
loading

This manual is also suitable for:

G350

Table of Contents