Note:
Once header compression is enabled, any change to a header compression
Note:
parameter is effective immediately.
3. To disable VJ TCP header compression on an interface, use the no ip tcp
header-compression command in the interface context.
Summary of Van Jacobson header compression CLI commands
For more information about these commands, see Avaya G250 and Avaya G350 CLI
Reference, 03-300437.
Table 69: Van Jacobson header compression CLI commands
Root level command
clear ip tcp
header-compression
interface
(dialer|serial)
show ip tcp
header-compression
show ip tcp
header-compression
brief
Displaying and clearing header compression statistics
For a full description of the commands and their output fields, see Avaya G250 and Avaya G350
CLI Reference, 03-300437.
Use the show ip rtp header-compression command to display the RTP header
●
compression statistics for a specific interface. If no interface is specified, statistics for all
interfaces are displayed.
First level command
ip tcp
compression-
connections
ip tcp
header-compression
Configuring header compression
Description
Clear TCP header compression statistics for
all enabled interfaces or for a specific
interface
Enter the Dialer or Serial interface
context
Set the total number of TCP header
compression connections supported on the
current interface
Enable TCP header compression on the
current interface
Display TCP header compression statistics
for a specific interface
Display a subset of TCP header
compression statistics in the form of a table
Issue 5 June 2008
251