Defining The Default Gateway; Summary Of Default Gateway Configuration Cli Commands; Configuring The Media Gateway Controller (Mgc) - Avaya G250 Administration Manual

Media gateways

Hide thumbs Also See for G250:

Table of Contents

Basic device configuration

Defining the default gateway

The G250/G350 uses a default gateway to connect to outside networks that are not listed on the

G250/G350's routing table. To define a default gateway, use the ip default-gateway

command, followed by either the IP address or name (type and number) of the interface you

want to define as the default gateway.

The following example defines the interface with the IP address 132.55.4.45 as the default

ip default-gateway 132.55.4.45

The following example defines Serial interface 3/1:1 as the default gateway:

ip default-gateway serial 3/1:1

For more information about these commands, see Avaya G250 and Avaya G350 CLI

Reference, 03-300437.

Table 17: PMI configuration CLI commands

ip default-gateway

The Media Gateway Controller (MGC) controls telephone services on the Avaya G250/G350

Media Gateway. You can use a server with Avaya Communication Manager software as an

MGC. The G250/G350 supports both External Call Controllers (ECC) and Internal Call

Controllers (ICC). An ICC is an Avaya S8300 Server that you install in the G250/G350 as a

media module. An ECC is an external server that communicates with the G250/G350 over the

When the G250/G350 uses an ECC, it can use a local S8300 as a backup controller for

Enhanced Local Survivability (ELS). The S8300 functions in Local Survivable Processor (LSP)

mode. If the ECC stops serving the G250/G350, the S8300 takes over the service.

92 Administration for the Avaya G250 and Avaya G350 Media Gateways

Set a default gateway for connecting to outside

networks that are not listed on the G250/G350's routing