Summary Of Software And Firmware Management Commands - Avaya G250 Administration Manual

Basic device configuration
capture-file. The packet sniffing buffer
●
cdr-file. A Call Detail Recording (CDR) file
●
dhcp-binding. The DHCP binding file
●
Use the copy file scp command to upload a specific file from the gateway to an SCP
●
server, where file can be any of the following:
announcement-file. Announcements files
●
auth-file. Authentication file
●
capture-file. The packet sniffing buffer
●
capture-file. The packet sniffing buffer
●
cdr-file. A Call Detail Recording (CDR) file
●
dhcp-binding. The DHCP binding file
●
Use the copy file tftp command to upload a specific file from the gateway to a TFTP
●
server, where file can be any of the following:
announcement-file. Announcements files
●
capture-file. The packet sniffing buffer
●
auth-file. Authentication file
●
capture-file. The packet sniffing buffer
●
cdr-file. A Call Detail Recording (CDR) file
●
dhcp-binding. The DHCP binding file
●

Summary of software and firmware management commands

For more information about these commands, see Avaya G250 and Avaya G350 CLI
Reference, 03-300437.
Table 22: Software and firmware management CLI commands
Command
copy file ftp
copy file scp
copy file tftp
copy file usb
114 Administration for the Avaya G250 and Avaya G350 Media Gateways
Description
Upload a specific file from the gateway to an FTP server
Upload a specific file from the gateway to an SCP server
Upload a specific file from the gateway to a TFTP server
Upload a specific file from the gateway to the USB mass
storage device
1 of 3