SNMP Trap Settings
Allow the System Administrator to enable SNMP Trap Alert Notification for sending trap message to the set
SNMP Trap receiver IP address when the network is disconnected/ connecting and being attacked by hackers
or when emergency conditions occur.
Step 1: Enable SNMP Trap Alert Notification.
Step 2: SNMP Trap Receiver Address : Set the SNMP Trap Receiver Address.
Step 3: SNMP Trap Port : Set the SNMP Trap Receiver Port.
Step 4: SNMP Trap Test : Click the [Trap Test] button to test if you can receive the SNMP Trap Alert
Notification.
4.1.12 Permitted IPs
Only the authorized IP address is permitted to manage MH-2K/4K.
Multi-Homing Security Gateway User's Manual
- 40 -