Planet MH-4000 User Manual page 51

Using the WAN 1/2 Interface, the Administrator can sets up the WAN 1/2 network. These IP Addresses are
real public IP Addresses, and are routable on the Internet.
Alive Indicator Site IP: This feature is used to ping an address for detecting WAN connection status.
Service: ICMP You can select an IP address by Assist, or type an IP address manually.
Service: DNS You can select a DNS IP and Domain name by Assist, or type the related data manually.
For PPPoE (ADSL User): This option is for PPPoE users who are required to enter a username and
password in order to connect, such as ADSL users.
Current Status: Displays the current line status of the PPPoE connection.
IP Address: Displays the IP Address of the PPPoE connection
Username: Enter the PPPoE username provided by the ISP.
Password: Enter the PPPoE password provided by the ISP.
IP Address provided by ISP:
Dynamic: Select this if the IP address is automatically assigned by the ISP.
Fixed: Select this if you were given a static IP address. Enter the IP address that is given to you by
your ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Service-On-Demand:
Auto Disconnect: The PPPoE connection will automatically disconnect after a length of idle time (no
activities). Enter in the amount of idle minutes before disconnection. Enter '0' if you do not want the
PPPoE connection to disconnect at all.
Ping: Select this to allow the WAN 1 network to ping the IP Address of MH-2K/4K. This will allow people
from the Internet to be able to ping MH-2K/4K. If set to enable, the device will respond to echo request
packets from the WAN 1/2 network.
HTTP/HTTPS: Select this to allow the device WebUI to be accessed from the WAN 1 network. This will
allow the WebUI to be configured from a user on the Internet. Keep in mind that the device always
requires a username and password to enter the WebUI. (HTTPS is only available with MH-4000)
Multi-Homing Security Gateway User's Manual
- 46 -