Planet MH-4000 User Manual page 183

Auto-Connect when sending packet through the link: Check to enable the auto-connection
whenever there's packet to transmit over the connection. The feature will be disabled
automatically if always-connect is checked.
Auto-Disconnect if idle
when there is no activity for a predetermined period of time. To keep the line always
connected, set the number to 0. The feature will be disabled automatically if
always-connect is checked.
Schedule Click the down arrow to select the schedule, which was pre-determined in Schedule.
Refer to the corresponding section for details.
NAT: Check this feature if the remote PPTP Server belongs to Windows Server based.
Step 3. Click OK to save modifications or click Cancel to cancel modifications.
Modifying PPTP Client
Step 1. Select VPN→PPTP Client.
Step 2. In the PPTP Client window, find the PPTP server that you want to modify and click Modify.
Step 3. Enter appropriate settings.
Step 4. Click OK to save modifications or click Cancel to cancel modifications
Removing PPTP Client
Step 1. Select VPN→PPTP Client.
Step 2. In the PPTP Client window, find the PPTP client that you want to modify and click Remove.
Step 3. Click OK to remove the PPTP client or click Cancel to exit without removal.
Multi-Homing Security Gateway User's Manual
minutes: Configure this device to disconnect to the PPTP Server
- 178 -