Planet MH-4000 User Manual page 53

will allow the WebUI to be configured from a user on the Internet. Keep in mind that the device always
requires a username and password to enter the WebUI. (HTTPS is only available with MH-4000)
For Static IP Address: This option is for users who are assigned a static IP Address from their ISP. Your ISP
will provide all the information needed for this section such as IP Address, Netmask, Gateway, and DNS.
Use this option also if you have more than one public IP Address assigned to you.
IP Address: Enter the static IP address assigned to you by your ISP. This will be the public IP
address of the WAN 1 port of the device.
Netmask: This will be the subnet mask of the WAN 1 network. (i.e. 255.255.255.0)
Default Gateway: This will be the Gateway IP address.
Domain Name Server (DNS): This is the IP Address of the DNS server.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Ping: Select this to allow the WAN 1 network to ping the IP Address of MH-2K/4K. This will allow
people from the Internet to be able to ping MH-2K/4K. If set to enable, the device will respond to echo
request packets from the WAN 1 network.
HTTP/HTTPS: Select this to allow the device WEBUI to be accessed from the WAN 1 network. This
will allow the WebUI to be configured from a user on the Internet. Keep in mind that the device always
requires a username and password to enter the WebUI. (HTTPS is only available with MH-4000)
Multi-Homing Security Gateway User's Manual
- 48 -