Planet MH-4000 User Manual page 14

For Dynamic IP Address (Cable Modem User): This option is for users who are automatically assigned an
IP address by their ISP, such as cable modem users. The following fields apply:
MAC Address: This is the MAC Address of the device. Some ISPs require specified MAC address. If the
required MAC address is your PC's, click Clone MAC Address.
Hostname: This will be the name assign to the device. Some cable modem ISP assigns a specific
hostname in order to connect to their network, please enter the hostname here. If not
required by your ISP, you do not have to enter a hostname.
Domain Name: You can specify your own domain name or leave it blank.
User Name: The user name is provided by ISP.
Password: The password is provided by ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
For Static IP Address: This option is for users who are assigned a static IP Address from their ISP. Your ISP
will provide all the information needed for this section such as IP Address, Netmask, Gateway, and DNS.
IP Address: Enter the static IP address assigned to you by your ISP. This will be the public IP address of
the WAN 1 port of the device.
Netmask: This will be the Netmask of the WAN 1 network. (i.e. 255.255.255.0)
Default Gateway: This will be the Gateway IP address.
Domain Name Server (DNS): This is the IP Address of the DNS server.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
For PPTP (European User Only): This is mainly used in Europe. You need to know the PPTP Server
address as well as your name and password.
User Name: The user name is provided by ISP.
Password: The password is provided by ISP.
IP Address: Enter the static IP address assigned to you by your ISP, or obtain an IP address
automatically from ISP.
PPTP Gateway: Enter the PPTP server IP address assigned to you by your ISP.
Connect ID: This is the ID given by ISP. This is optional.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
BEZEQ-ISRAEL: Select this item if you are using the service provided by BEZEQ in Israel.
Service-On-Demand: The PPTP connection will automatically disconnect after a length of idle time (no
NOTE: This function is not supported on MH-4000.
Ping: Select this to allow the WAN network to ping the IP Address of MH-2K/4K This will allow people from
the Internet to be able to ping MH-2K/4K WAN IP. If set to enable, the device will respond to echo request
packets from the WAN network.
activities). Enter the amount of idle minutes before disconnection. Enter '0' if you
do not want the PPTP connection to disconnect at all.
Multi-Homing Security Gateway User's Manual
- 9 -