Planet MH-4000 User Manual page 192

At first, the System Administrator can learn the 2 MX Records from querying mail.planet.com.tw below.
Name
mail.planet.com.tw
mail.planet.com.tw
Because the number of priority, 1, has the highest priority, MH-4000 would use the server,
smtp1.planet.com.tw, to send e-mail (via SMTP Protocol) by default. If the 1
the e-mail to the server with second priority automatically.
Inbound Load Balance Examples
The following provide 4 examples for testing the Inbound Load Balance feature.
Setup WEB Server and Type is
Example 1
Setup WEB Server and Type is
Example 2
Setup WEB Server and Type is
Example 3
Setup MAIL Server for
Example 4
Preparation
The domain name of DNS Server should map into Fixed IP.
Enter the WAN window under the Interface menu.
In WAN 1 and WAN 2 window respectively, enter relating parameter below:
WAN 1 IP: 61.11.11.11
WAN 2 IP: 211.22.22.22
Have the DNS's domain name (broadband.com.tw) provided by ISP registered in Network Information Center.
Primary DNS Server
Host Name dns1.broadband.com.tw
IP Address 61.11.11.11
Secondary DNS Server
Host Name dns2.broadband.com.tw
IP Address 211.22.22.22
Type Address
MX smtp1.planet.com.tw
MX smtp2.planet.com.tw
Round-Robin in Inbound Load Balance.
Multi-Homing Security Gateway User's Manual
Reverse
X
X
A for Back up in Inbound Load Balance.
A for Round-Robin in Inbound Load Balance.
CNAME for Round-Robin in Inbound Load Balance.
- 187 -
Weight Priority
--
--
st
server can't run well, it will send
1
2