Planet MH-4000 User Manual page 43

If you want to use the Host Table function of the device, the end user's main DNS server IP address
should be the same IP Address as the device.
Click on System in the menu bar, then click on Host Table below it. The Host Table window will appear.
Below is the information needed for setting up the Host Table:
•
Host Name: The domain name of the server
•
Virtual IP Address: The virtual IP address respective to Host Table
•
Configure: modify or remove each Host table policy
Adding a new Host Table
Click on the New Entry button and the Add New Host Table window will appear.
Step 1:
Fill in the appropriate settings for the domain name and virtual IP address.
Step 2:
Click OK to save the policy or Cancel to cancel.
Step 3:
Modifying a Host Table
Step 1: In the Host Table window, find the policy to be modified and click the corresponding Modify option in
the Configure field.
Multi-Homing Security Gateway User's Manual
- 38 -