Permitted Ips - Planet CS-2001 User Manual

1.2 Permitted IPs

1.2.1 Adding a Permitted IP
Step 1. Under System > Administrator > Permitted IPs, click the New Entry
button and then set as below:

Enter the name in the Name field.

Select IPv4 for Protocol.

Enter the IP address.

Enter the netmask. (255.255.255.255 indicates one IP Address)

Select Ping, HTTP and HTTPS for Service.

Click OK.
Important：
1. For Permitted IPs to be effective, the IT administrator must cancel the Ping, HTTP, HTTPS,
Telnet and SSH selections under Network > Interface.
2. Configure the Permitted IPs before the cancellation of HTTP and HTTPS; otherwise, the
management interface will be inaccessible.
（Figure 1-3）
Figure 1-3 Adding New Permitted IPs
21