NOTE: When the LAN user access to WAN network and do not use for a while, the connection will be
time-out. User has to re-login again. The default time is 30 minutes and you can configure this time by
"Authentication"-> "Auth Setting" page.
In the form of controlling the [Outgoing] Policy, enable the Authentication-User Function.
NOTE: If Outgoing Policy only has configured one rule with Authentication feature enabled, please add
another rule to allow DNS protocol passing through Internet. After that, when each LAN user tries to browse
website, the Authentication page will pop up automatically.
User Login Page Definitions:
Multi-Homing Security Gateway User's Manual
- 84 -