Planet MH-4000 User Manual page 54

For PPTP (European User Only): This is mainly used in Europe. You need to know the PPTP Server
address as well as your name and password.
User Name: The user name is provided by ISP.
Password: The password is provided by ISP.
IP Address: Enter the static IP address assigned to you by your ISP, or obtain an IP address
automatically from ISP.
PPTP Gateway: Enter the PPTP server IP address assigned to you by your ISP.
Connect ID: This is the ID given by ISP. This is optional.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
BEZEQ-ISRAEL: Select this item if you are using the service provided by BEZEQ in Israel.
Service-On-Demand: The PPPoE connection will automatically disconnect after a length of idle time
(no activities). Enter in the amount of idle minutes before disconnection. Enter '0' if you do not want the
PPPoE connection to disconnect at all.
Ping: Select this to allow the WAN 1 network to ping the IP Address of MH-2K/4K.This will allow people
from the Internet to be able to ping MH-2K/4K. If set to enable, the device will respond to echo request
packets from the WAN 1 network.
HTTP: Select this to allow the device WEBUI to be accessed from the WAN 1 network. This will allow
the WebUI to be configured from a user on the Internet. Keep in mind that the device always requires a
username and password to enter the WebUI.
Multi-Homing Security Gateway User's Manual
- 49 -