Planet MH-4000 User Manual page 182

User Name Displays the PPTP Client user's name for authentication.
Server Address Display the PPTP Server IP addresses.
Encryption Displays the PPTP Client Encryption ON or OFF
Uptime Displays the current PPTP connection time.
Status Displays the current PPTP connection status.
Configure Click Modify to modify the PPTP Client settings or click Remove to remove the
item.
Adding a PPTP Client
Step 1. Select VPN→PPTP Client.
Step 2. Configure the parameters.
User name: Specify the PPTP client. This should be unique.
Password: Specify the PPTP client password.
Server Address: Enter the PPTP Server's IP address.
Encryption: Enable or Disabled the Encryption.
Remote Server:
Single Machine: Enter the PPTP Server IP address. PPTP client will only to access the
resource of PPTP server.
Multi-Machine: Check to allow connecting to the LAN computers of the PPTP Server on
remote site.
always-connect: Check to enable PPTP connection always on line.
IP Address Enter the PPTP Server LAN IP subnet.
Netmask: Enter the PPTP Server LAN IP subnet mask.
Multi-Homing Security Gateway User's Manual
- 177 -