Planet MH-4000 User Manual page 27

MTU (set networking packet length)
The administrator can modify the networking packet length.
Step 1. MTU Setting. Modify the networking packet length.
Link Speed / Duplex Mode Setting
This function allows administrator to set the transmission speed and mode of WAN Port. This feature is only
available with MH-2000.
Dynamic Routing (RIPv2)
Enable Dynamic Routing (RIPv2), MH-2K/4K will advertise an IP address pool to the specific network so that
the address pool can be provided to the network. You can choose to enable LAN, WAN or DMZ interface to
allow RIP protocol supporting.
Routing information update timer: MH-2K/4K will send out the RIP protocol in a period of time to update the
routing table, the default timer is 30 seconds.
Routing information timeout: If MH-2K/4K does not receive the RIP protocol from the other router in a
period of time, MH-2K/4K will cut off the routing automatically until it receives RIP protocol again. The default
timer is 180 seconds.
Multi-Homing Security Gateway User's Manual
- 22 -