Planet MH-4000 User Manual page 56

Multi-Homing Security Gateway User's Manual
DMZ Interface: Display DMZ NAT Mode /DMZ TRANSPARENT Mode functions of DMZ to show if they are
enabled or disabled.
IP Address: The private IP address of MH-2K/4K's DMZ interface. This will be the IP address of the DMZ port.
If it is in NAT mode, the IP address the Administrator chooses will be a private IP address and cannot use the
same network as the WAN or LAN network.
NetMask: This will be the subnet mask of the DMZ network.
Ping: Select this to allow the DMZ network to ping the IP Address of MH-2K/4K. This will allow people from
the Internet to be able to ping MH-2K/4K. If set to enable, the device will respond to echo request packets
from the DMZ network.
HTTP/HTTPS: Select this to allow the device WEBUI to be accessed from the WAN 1 network. This will allow
the WebUI to be configured from a user on the Internet. Keep in mind that the device always requires a
username and password to enter the WebUI. (HTTPS is only available with MH-4000)
- 51 -