Planet MH-4000 User Manual page 120

Step 2: The fields of the Incoming window are:
Source: source networks which are specified in the WAN section of the Address menu, or
all the WAN network addresses.
Destination: destination networks, which are IP Mapping addresses or Virtual server
network addresses created in Virtual Server menu.
Service: services supported by Virtual Servers (or Mapped IP).
Action: control actions to permit or deny packets from WAN
Server/Mapped IP travelling through the device.
Option: specify the monitoring functions on packets from WAN networks to Virtual
Server/Mapped IP travelling through MH-2K/4K.
Configure: modify settings or remove incoming policy.
Move: this sets the sequence of the policies, number 1 being the first policy to proceed.
Adding an Incoming Policy
Step 1: Under Incoming of the Policy menu, click the New Entry button.
Multi-Homing Security Gateway User's Manual
- 115 -
networks to Virtual