Planet MH-4000 User Manual page 169

keep connecting.
tep 8. Click the down arrow to select the policy of schedule, which was pre-determined in Schedule. Refer to
S
the corresponding section for details.
tep 9. Click OK to finish the setting of Company A.
S
The Gateway of Company B is 192.168.20.1. The settings of company B are as the following.
tep 1. Enter the default IP of Company B's Multi-Homing Security Gateway, 192.168.20.1. Click VPN in the
S
menu bar on the left hand side, and then select the sub-select IPSec Autokey. Click Add.
Step 2. Enter the VPN name, VPN_B in IPSec Autokey window, and choose From Source
the subnet IP, 192.168.20.0 and subnet mask, 255.255.255.0.
tep 3. In To Destination table, choose Remote Gateway-Fixed IP, enter the IP desired to be connected,
S
company A's subnet IP and mask, 192.168.10.0 and 255.255.255.0 respectively.
Step 4. In Authentication Method Table, choose Preshare and enter the Preshared Key. ( The max length is
Multi-Homing Security Gateway User's Manual
- 164 -
to be Internal. Fill