Planet MH-4000 User Manual page 128

Please follow the same procedures for DMZ networks to LAN networks.
Entering the DMZ To WAN window:
Click DMZ To WAN under Policy menu and the DMZ To WAN table appears displaying currently defined
DMZ To WAN policies.
The fields in the DMZ To WAN window are:
Source: source network addresses which are specified in the DMZ section of the Address
window.
Destination: destination networks, which is the WAN network address
Service: services supported by Servers of WAN networks.
Action: control actions, to permit or deny packets from the DMZ network to WAN networks
travelling through MH-2K/4K.
Option: specify the monitoring functions on packets from the DMZ network to WAN networks
travelling through MH-2K/4K..
Configure: modify settings or remove policies
Move: this sets the sequence of the policies, number 1 being the first policy to proceed.
Adding a DMZ To WAN Policy:
Step 1: Click the New Entry button and the Add New Policy window will appear.
Multi-Homing Security Gateway User's Manual
- 123 -