Auth User - Planet MH-4000 User Manual

Multi-Homing Security Gateway User's Manual
Authentication Port: The port number used for user login page. When user want to access WAN network
and the authentication (Policy -> Outgoing) is enabled, the user has to send http request with this port number.
MH-2K/MH-4K will send a User Login page for user to input user name and password. For example, if the
gateway IP address is 192.168.1.1 and authentication port is 82, user have to open a web browser and input
http://192.168.1.1:82 on the address file to have the user login page.
Re-Login if Idle: When the LAN user access to WAN network and do not use for a while, the connection will
be time-out. User has to re-login again. The default time is 30 minutes and you can configure this time by
"System"-> "Setting" page.
Re-Login after user login successfully: When user login authentication page successfully access WAN for
a while, MH-2K/MH-4K will asking user login again. The default time is unlimited time.
Disallow Re-Login auth user has login: when the user login authentication page, can not login same
account again on other web page.
URL to redirect when authentication succeed: You can set up the default webpage to force user to access
it first when user passes the authentication.
Messages to display when user login: You can specify a message to display at user's login page when
user passes the authentication.

4.7.2 Auth User

Click Authentication in the menu bar on the left hand side and click Auth User.
- 82 -