Planet MH-4000 User Manual page 37

Route Table functions
Interface: Destination network, LAN or WAN 1 networks.
Destination IP: IP address of destination network.
NetMask: Netmask of destination network.
Gateway: Gateway IP address for connecting to destination network.
Configure: Change settings in the route table.
Adding a new Static Route
Step 1. In the Route Table window, click the New Entry button.
Step 2. In the Add New Static Route window, enter new static route information.
Step 3. In the Interface field's pull-down menu, choose the network to connect (LAN, WAN1, WAN2,
DMZ).
Step 4. Click OK to add the new static route or click Cancel to cancel.
Modifying a Static Route:
Step 1. In the Route Table menu, find the route to edit and click the corresponding Modify option in the
Configure field.
Step 2. In the Modify Static Route window, modify the necessary routing addresses.
Step 3. Click OK to apply changes or click Cancel to cancel it.
Multi-Homing Security Gateway User's Manual
- 32 -