Planet MH-4000 User Manual page 46

Add Permitted IP Address
Step 1. Click New Entry button.
Step 2. In IP Address field, enter the LAN IP address or WAN IP address.
IP address: Enter the LAN IP address or WAN IP address.
Netmask: Enter the netmask of LAN/WAN.
Ping: Select this to allow the external network to ping the IP Address of the Firewall.
HTTP/HTTPS: Check this item, Web User can use HTTP or HTTPS to connect to the Setting
window of MH-2K/4K (HTTPS is only available with MH-4000).
Step 3. Click OK to add Permitted IP or click Cancel to discard changes.
Modify Permitted IP Address
Step 1. In the table of Permitted IPs, highlight the IP you want to modify, and then click Modify.
Step 2. In Modify Permitted IP, enter new IP address.
Step 3. Click OK to modify or click Cancel to discard changes.
Remove Permitted IP addresses
Step 1. In the table of Permitted IPs, highlight the IP you want to remove, and then click Remove.
Multi-Homing Security Gateway User's Manual
- 41 -